| 01 |
Suitable drill type |
 2.2mm |
|
| 02 |
Drill diameter range |
0.1mm ~0.15mm |
optional |
| 0.2mm ~2.2mm |
standard |
| 03 |
Function |
Upper ring |
19.0mm ~22.5mm |
material conveyed plate: single inspection (standard) double inspection (optional) |
| Lower ring |
19.0mm ~22.5mm |
double inspection (standard) |
| Pushing ring (deepened) |
19.0mm ~22.5mm |
double inspection (standard) |
| Diameter inspect |
0.1mm ~0.15mm |
optional |
| 0.2mm ~0.6mm |
standard |
| Monitor the ring thickness |
4.3mm ~4.7mm |
the ring thickness can be set up in advance |
| Monitor the drill's total length |
standard |
the total length can be set up in advance |
| 04 |
Capacity |
25-30 drills / one batch |
depends on the human practiced degree |
| 05 |
Precision |
±0.03mm |
|
| 06 |
Setup defects tolerance |
Yes |
|
| 07 |
Unusual length warnings |
Yes |
the inspection results show on the screen |
| 08 |
Unusual ring thickness warnings |
Yes |
the inspection results show on the screen |
| 09 |
Inspect the upper ring length with CCD |
Yes |
|
| Inspect the drill diameter with CCD |
Yes |
|
| 10 |
Store the length data |
Yes |
|
| 11 |
Store the ring thickness data |
Yes |
|
| 12 |
Administrator password protection |
Yes |
|
| 13 |
Power supply requirements |
110VAC±10%/60Hz |
Taiwan |
| 220VAC±10%/50Hz |
China |
| 14 |
Air compressor requirements |
None |
|
| 15 |
Size WxDxH |
695mmx550mmx660mm |
Area needed
WxD 1400mmx700mm |
| 16 |
Weight |
40kg |
|
| |
Note |
Our company reserves the rights of design change. |
