|
| 01 |
Drill diameter range (standard) |
 0.20mm ~1.15mm |
| 02 |
Drill diameter range (optional) |
0.075mm ~0.15mm |
| 03 |
Detects 10 major defects of drill bits |
Yes |
| 04 |
Error values of drill diameter |
Yes |
| 05 |
Error values of drill web |
Yes |
| 06 |
Precision |
0.075mm -0.15mm |
±0.5 μm |
| 07 |
0.20mm -0.40mm |
±0.5 μm |
| 08 |
0.45mm -1.15mm |
±1.2 μm |
| 09 |
Sieve point angles |
Yes (120/130度) |
| 10 |
Grind traces by emery wheel |
Clear |
| 11 |
Focus method |
Automatic (10 drills each time), (X-Y-Z) 3-axis auto-shift focus |
| 12 |
CCD pixel |
1.45 megapixel |
| 13 |
Drill carrier |
10 plastic boxes |
| 14 |
Drills / one batch |
10 |
| 15 |
Inspection rate |
over 6~7 drills/min (re-inspecting time after cleaning is not included) |
| 16 |
Suitable: with circuit ring / without circuit ring / ground drill |
standard (drill stem3.175mm) |
| 17 |
Determine flawed drills |
Standard |
| 18 |
Exclude flawed drills |
Manual (the inspection results show on the screen) |
| 19 |
Setup defect tolerance |
Standard |
| 20 |
Setup diameter tolerance |
Standard |
| 21 |
SI / English units conversion |
Standard/td> |
| 22 |
Calibrate precision |
Yes(optional) |
| 23 |
Administrator password protection |
Standard |
| 24 |
Immediate image |
Standard |
| 25 |
Image storage |
Yes |
| 26 |
Inspection data storage |
Yes |
| 27 |
Air compressor requirements |
None |
| 28 |
Power supply |
110VAC±10%/60Hz (220VAC±10%/50Hz) |
| |
Size W x D |
800 x 700 mm (desktop model) |
| |
Note |
Overseas voltage specification is compatible |
